X
検索結果: ホワイトバランス
日本語のみ
|
|
|
|
|
|
記事ID
詳細
How do I restore an IQ digital back to factory defaults and/or reset the IQ digital back user interface?
問題
I need to restore the IQ digital back to factory defaults/original firmware. I need to reset the IQ digital back user interface.
解決策
Summary You can rest both the firmware and interface using the two techniques below Firmware - Hold down the top two silver buttons of the digital back and insert battery. Interface - Insert the battery and push all 4 buttons immediately In-Depth For a firmware reset, hold down the top two si...
Language: English
記事ID
詳細
Custom Functions available for the Phase One 645DF
問題
What are the Custom Functions available for the Phase One 645DF and 645DF+ cameras?
解決策
Summary The DF and DF+ camera bodies have settings that can be changed. To alter them, use the CF (for  C ustom  F unction) setting on the main dial. Use the front dial to choose the function number and the rear dial to change the function's value. In-Depth The DF and DF+ camera bodies have fu...
Language: English
記事ID
詳細
Phase One Camera System and IQ Series digital backs contain the following warranties and items:
問題
What warranty comes with a Phase One Camera System? What is in the box?
解決策
Ultimate Service & Support Phase One offers the best in-class support, promising our hardware users a response from the globally positioned support team within 8 hours, regardless of location and no matter what the concern. "We promise to respond within 8 hours. But typically, that is 7 hours more...
Language: English
記事ID
詳細
Horsemann Digiflex II with P-series Backs
問題
Below is a table which outlines the settings supported with P-series digital backs and the Horsemann Digiflex II.
解決策
ID Setting: The camera selector switch located on the bottom of the camera. LightPhase, H5, H10-6MP, H25 set the switch to 0 H20 set the switch to 1 H10-11MP set the switch to 1 or 5  
Language: English
記事ID
詳細
The FlexAdaptor Viewfinder & Focusing Screen
問題
How to use The FlexAdaptor Viewfinder & Focusing Screen
解決策
The FlexAdaptor Viewfinder   The viewfinder that comes with the FlexAdaptor is equipped with a built-in magnifying glass. Mount the viewfinder on top of the FlexAdaptor's focusing screen by placing the right side of the viewfinder at the right side of the ground glass. Now gently press the viewf...
Language: English
記事ID
詳細
Hasselblad H System: Mounting the viewfinder mask and connecting the Flash Sync.
問題
I need to know the correct way to mount the Viewfinder Mask and the Sync Cable for the Hasselblad H series camera?
解決策
The image area of the Hasselblad H Camera System is approximately 6cm x 4.5cm.  However several digital backs have a sensor that is smaller than that measurement and require a viewfinder mask to provide an accurate reference when composing an image.   When you purchase a Phase One Digital Back the t...
Language: English
記事ID
詳細
Interface & control cables from Leaf
問題
I'm not sure which cable I have or need for interfacing between my camera and digital back.
解決策
Summary If you are using a camera body without an electronic user interface similar to a Phase One / Mamiya camera body, chances are you will need a cable to from the lens to the Leaf Digital back to allow proper communication. Below you will find the details and visuals of the different cable types...
Language: English
記事ID
詳細
FlexAdaptor, electronic shutters and the Phase One One-Shot sync cable
問題
In many scenarios, a large format camera is used with a copal, external, or built-in shutter. These shutters can be a weak point in terms of the synchronization signal from lens to the camera back. In general, the shutter is the source of most issues when using large format. Using older lenses and not digital prepared lenses can cause image degradation.
解決策
The Phase One One-Shot sync cable Phase One backs require two signals provided by a camera/shutter. The first signal provides a wake up impulse for the digital back and the second signal is the integration signal. This is normally provided by the camera's flash connector. When using Phase One ba...
Language: English
記事ID
詳細
Mounting the FlexAdapter in Portrait or Landscape Mode
問題
Does the FlexAdaptor allow image capturing in both portrait and landscape mode?
解決策
Yes, in order to switch from portrait mode to landscape mode and vice versa the interchangeable insert, must be turned to the correct orientation: 1. Open the insert lock by pressing the two blue switches on the closing mechanism 2. Turn the insert 90° or 270° 3. Click the insert back on again Tho...
Language: English
記事ID
詳細
How to deactivate Capture One directly in the application
問題
It is now possible to deactivate a specific instance of Capture One directly from within the software. Eliminating the need to contact Phase One support in order to free up activation credits or to install Capture One on new or upgraded computer, or to switch between Capture One Modes (trial, DB, non PRO and PRO). If you no longer have access to the computer, click here for instructions to deactivate from the Phase One website
解決策
1.  Open the License window.   On PC you can do so by going to menu and selecting “Help” followed by “License Information” and on Mac by going to “Capture One” menu item and selecting “License…”   On Mac you can access the license window in following fashion: "Capture One" menu item and select "Lic...
Language: English